1. 8.10 Images
    2. 8.11 Animation frames

8.10 Images

ImageBitmap

Support in all current engines.

Firefox42+Safari15+Chrome50+
Opera?Edge79+
Edge (Legacy)?Internet ExplorerNo
Firefox Android?Safari iOS?Chrome Android?WebView Android?Samsung Internet?Opera Android?
[Exposed=(Window,Worker), Serializable, Transferable]
interface ImageBitmap {
  readonly attribute unsigned long width;
  readonly attribute unsigned long height;
  undefined close();
};

typedef (CanvasImageSource or
         Blob or
         ImageData) ImageBitmapSource;

enum ImageOrientation { "from-image", "flipY" };
enum PremultiplyAlpha { "none", "premultiply", "default" };
enum ColorSpaceConversion { "none", "default" };
enum ResizeQuality { "pixelated", "low", "medium", "high" };

dictionary ImageBitmapOptions {
  ImageOrientation imageOrientation = "from-image";
  PremultiplyAlpha premultiplyAlpha = "default";
  ColorSpaceConversion colorSpaceConversion = "default";
  [EnforceRange] unsigned long resizeWidth;
  [EnforceRange] unsigned long resizeHeight;
  ResizeQuality resizeQuality = "low";
};

An ImageBitmap object represents a bitmap image that can be painted to a canvas without undue latency.

The exact judgement of what is undue latency of this is left up to the implementer, but in general if making use of the bitmap requires network I/O, or even local disk I/O, then the latency is probably undue; whereas if it only requires a blocking read from a GPU or system RAM, the latency is probably acceptable.

promise = self.createImageBitmap(image [, options ])

createImageBitmap

Support in all current engines.

Firefox42+Safari15+Chrome50+
Opera?Edge79+
Edge (Legacy)?Internet ExplorerNo
Firefox Android?Safari iOS?Chrome Android?WebView Android?Samsung Internet?Opera Android?
promise = self.createImageBitmap(image, sx, sy, sw, sh [, options ])

Takes image, which can be an img element, an SVG image element, a video element, a canvas element, a Blob object, an ImageData object, or another ImageBitmap object, and returns a promise that is resolved when a new ImageBitmap is created.

If no ImageBitmap object can be constructed, for example because the provided image data is not actually an image, then the promise is rejected instead.

If sx, sy, sw, and sh arguments are provided, the source image is cropped to the given pixels, with any pixels missing in the original replaced by transparent black. These coordinates are in the source image's pixel coordinate space, not in CSS pixels.

If options is provided, the ImageBitmap object's bitmap data is modified according to options. For example, if the premultiplyAlpha option is set to "premultiply", the bitmap data's color channels are premultiplied by its alpha channel.

Rejects the promise with an "InvalidStateError" DOMException if the source image is not in a valid state (e.g., an img element that hasn't loaded successfully, an ImageBitmap object whose [[Detached]] internal slot value is true, an ImageData object whose data attribute value's [[ViewedArrayBuffer]] internal slot is detached, or a Blob whose data cannot be interpreted as a bitmap image).

Rejects the promise with a "SecurityError" DOMException if the script is not allowed to access the image data of the source image (e.g. a video that is CORS-cross-origin, or a canvas being drawn on by a script in a worker from another origin).

imageBitmap.close()

ImageBitmap/close

Support in all current engines.

Firefox46+Safari15+Chrome52+
Opera37+Edge79+
Edge (Legacy)?Internet ExplorerNo
Firefox Android?Safari iOS?Chrome Android?WebView Android?Samsung Internet?Opera Android37+

Releases imageBitmap's underlying bitmap data.

imageBitmap.width

ImageBitmap/width

Support in all current engines.

Firefox42+Safari15+Chrome50+
Opera?Edge79+
Edge (Legacy)?Internet ExplorerNo
Firefox Android?Safari iOS?Chrome Android?WebView Android?Samsung Internet?Opera Android?

Returns the natural width of the image, in CSS pixels.

imageBitmap.height

ImageBitmap/height

Support in all current engines.

Firefox42+Safari15+Chrome50+
Opera?Edge79+
Edge (Legacy)?Internet ExplorerNo
Firefox Android?Safari iOS?Chrome Android?WebView Android?Samsung Internet?Opera Android?

Returns the natural height of the image, in CSS pixels.

An ImageBitmap object whose [[Detached]] internal slot value is false always has associated bitmap data, with a width and a height. However, it is possible for this data to be corrupted. If an ImageBitmap object's media data can be decoded without errors, it is said to be fully decodable.

An ImageBitmap object's bitmap has an origin-clean flag, which indicates whether the bitmap is tainted by content from a different origin. The flag is initially set to true and may be changed to false by the steps of createImageBitmap().


ImageBitmap objects are serializable objects and transferable objects.

Their serialization steps, given value and serialized, are:

  1. If value's origin-clean flag is not set, then throw a "DataCloneError" DOMException.

  2. Set serialized.[[BitmapData]] to a copy of value's bitmap data.

Their deserialization steps, given serialized, value, and targetRealm, are:

  1. Set value's bitmap data to serialized.[[BitmapData]].

Their transfer steps, given value and dataHolder, are:

  1. If value's origin-clean flag is not set, then throw a "DataCloneError" DOMException.

  2. Set dataHolder.[[BitmapData]] to value's bitmap data.

  3. Unset value's bitmap data.

Their transfer-receiving steps, given dataHolder and value, are:

  1. Set value's bitmap data to dataHolder.[[BitmapData]].


The createImageBitmap(image, options) and createImageBitmap(image sx, sy, sw, sh, options) methods, when invoked, must run these steps:

  1. If either sw or sh is given and is 0, then return a promise rejected with a RangeError.

  2. If either options's resizeWidth or options's resizeHeight is present and is 0, then return a promise rejected with an "InvalidStateError" DOMException.

  3. Check the usability of the image argument. If this throws an exception or returns bad, then return a promise rejected with an "InvalidStateError" DOMException.

  4. Let p be a new promise.

  5. Let imageBitmap be a new ImageBitmap object.

  6. Switch on image:

    img
    SVG image
    1. If image's media data has no natural dimensions (e.g., it's a vector graphic with no specified content size) and either options's resizeWidth or options's resizeHeight is not present, then a promise rejected with an "InvalidStateError" DOMException.

    2. If image's media data has no natural dimensions (e.g., it's a vector graphics with no specified content size), it should be rendered to a bitmap of the size specified by the resizeWidth and the resizeHeight options.

    3. Set imageBitmap's bitmap data to a copy of image's media data, cropped to the source rectangle with formatting. If this is an animated image, imageBitmap's bitmap data must only be taken from the default image of the animation (the one that the format defines is to be used when animation is not supported or is disabled), or, if there is no such image, the first frame of the animation.

    4. If image is not origin-clean, then set the origin-clean flag of imageBitmap's bitmap to false.

    5. Run this step in parallel:

      1. Resolve p with imageBitmap.

    video
    1. If image's networkState attribute is NETWORK_EMPTY, then return a promise rejected with an "InvalidStateError" DOMException.

    2. Set imageBitmap's bitmap data to a copy of the frame at the current playback position, at the media resource's natural width and natural height (i.e., after any aspect-ratio correction has been applied), cropped to the source rectangle with formatting.

    3. If image is not origin-clean, then set the origin-clean flag of imageBitmap's bitmap to false.

    4. Run this step in parallel:

      1. Resolve p with imageBitmap.

    canvas
    1. Set imageBitmap's bitmap data to a copy of image's bitmap data, cropped to the source rectangle with formatting.

    2. Set the origin-clean flag of the imageBitmap's bitmap to the same value as the origin-clean flag of image's bitmap.

    3. Run this step in parallel:

      1. Resolve p with imageBitmap.

    Blob

    Run these step in parallel:

    1. Let imageData be the result of reading image's data. If an error occurs during reading of the object, then reject p with an "InvalidStateError" DOMException and abort these steps.

    2. Apply the image sniffing rules to determine the file format of imageData, with MIME type of image (as given by image's type attribute) giving the official type.

    3. If imageData is not in a supported image file format (e.g., it's not an image at all), or if imageData is corrupted in some fatal way such that the image dimensions cannot be obtained (e.g., a vector graphic with no natural size), then reject p with an "InvalidStateError" DOMException and abort these steps.

    4. Set imageBitmap's bitmap data to imageData, cropped to the source rectangle with formatting. If this is an animated image, imageBitmap's bitmap data must only be taken from the default image of the animation (the one that the format defines is to be used when animation is not supported or is disabled), or, if there is no such image, the first frame of the animation.

    5. Resolve p with imageBitmap.

    ImageData
    1. Let buffer be image's data attribute value's [[ViewedArrayBuffer]] internal slot.

    2. If IsDetachedBuffer(buffer) is true, then return a promise rejected with an "InvalidStateError" DOMException.

    3. Set imageBitmap's bitmap data to image's image data, cropped to the source rectangle with formatting.

    4. Run this step in parallel:

      1. Resolve p with imageBitmap.

    ImageBitmap
    1. Set imageBitmap's bitmap data to a copy of image's bitmap data, cropped to the source rectangle with formatting.

    2. Set the origin-clean flag of imageBitmap's bitmap to the same value as the origin-clean flag of image's bitmap.

    3. Run this step in parallel:

      1. Resolve p with imageBitmap.

    VideoFrame
    1. Set imageBitmap's bitmap data to a copy of image's visible pixel data, cropped to the source rectangle with formatting.

    2. Run this step in parallel:

      1. Resolve p with imageBitmap.

  7. Return p.

When the steps above require that the user agent crop bitmap data to the source rectangle with formatting, the user agent must run the following steps:

  1. Let input be the bitmap data being transformed.

  2. If sx, sy, sw and sh are specified, let sourceRectangle be a rectangle whose corners are the four points (sx, sy), (sx+sw, sy),(sx+sw, sy+sh), (sx,sy+sh). Otherwise let sourceRectangle be a rectangle whose corners are the four points (0,0), (width of input, 0), (width of input, height of input), (0, height of input).

    If either sw or sh are negative, then the top-left corner of this rectangle will be to the left or above the (sx, sy) point.

  3. Let outputWidth be determined as follows:

    If the resizeWidth member of options is specified
    the value of the resizeWidth member of options
    If the resizeWidth member of options is not specified, but the resizeHeight member is specified
    the width of sourceRectangle, times the value of the resizeHeight member of options, divided by the height of sourceRectangle, rounded up to the nearest integer
    If neither resizeWidth nor resizeHeight are specified
    the width of sourceRectangle
  4. Let outputHeight be determined as follows:

    If the resizeHeight member of options is specified
    the value of the resizeHeight member of options
    If the resizeHeight member of options is not specified, but the resizeWidth member is specified
    the height of sourceRectangle, times the value of the resizeWidth member of options, divided by the width of sourceRectangle, rounded up to the nearest integer
    If neither resizeWidth nor resizeHeight are specified
    the height of sourceRectangle
  5. Place input on an infinite transparent black grid plane, positioned so that its top left corner is at the origin of the plane, with the x-coordinate increasing to the right, and the y-coordinate increasing down, and with each pixel in the input image data occupying a cell on the plane's grid.

  6. Let output be the rectangle on the plane denoted by sourceRectangle.

  7. Scale output to the size specified by outputWidth and outputHeight. The user agent should use the value of the resizeQuality option to guide the choice of scaling algorithm.

  8. If the value of the imageOrientation member of options is "flipY", output must be flipped vertically, disregarding any image orientation metadata of the source (such as EXIF metadata), if any. [EXIF]

    If the value is "from-image", no extra step is needed.

    There used to be a "none" enum value. It was renamed to "from-image". In the future, "none" will be added back with a different meaning.

  9. If image is an img element or a Blob object, let val be the value of the colorSpaceConversion member of options, and then run these substeps:

    1. If val is "default", the color space conversion behavior is implementation-specific, and should be chosen according to the default color space that the implementation uses for drawing images onto the canvas.

    2. If val is "none", output must be decoded without performing any color space conversions. This means that the image decoding algorithm must ignore color profile metadata embedded in the source data as well as the display device color profile.

  10. Let val be the value of premultiplyAlpha member of options, and then run these substeps:

    1. If val is "default", the alpha premultiplication behavior is implementation-specific, and should be chosen according to implementation deems optimal for drawing images onto the canvas.

    2. If val is "premultiply", the output that is not premultiplied by alpha must have its color components multiplied by alpha and that is premultiplied by alpha must be left untouched.

    3. If val is "none", the output that is not premultiplied by alpha must be left untouched and that is premultiplied by alpha must have its color components divided by alpha.

  11. Return output.

The close() method steps are:

  1. Set this's [[Detached]] internal slot value to true.

  2. Unset this's bitmap data.

The width getter steps are:

  1. If this's [[Detached]] internal slot's value is true, then return 0.

  2. Return this's width, in CSS pixels.

The height getter steps are:

  1. If this's [[Detached]] internal slot's value is true, then return 0.

  2. Return this's height, in CSS pixels.

The ResizeQuality enumeration is used to express a preference for the interpolation quality to use when scaling images.

The "pixelated" value indicates a preference to scale the image that maximizes the appearance. Scaling algorithms that "smooth" colors are acceptable, such as bilinear interpolation.

The "low" value indicates a preference for a low level of image interpolation quality. Low-quality image interpolation may be more computationally efficient than higher settings.

The "medium" value indicates a preference for a medium level of image interpolation quality.

The "high" value indicates a preference for a high level of image interpolation quality. High-quality image interpolation may be more computationally expensive than lower settings.

Bilinear scaling is an example of a relatively fast, lower-quality image-smoothing algorithm. Bicubic or Lanczos scaling are examples of image-scaling algorithms that produce higher-quality output. This specification does not mandate that specific interpolation algorithms be used unless the value is "pixelated".

Using this API, a sprite sheet can be precut and prepared:

var sprites = {};
function loadMySprites() {
  var image = new Image();
  image.src = 'mysprites.png';
  var resolver;
  var promise = new Promise(function (arg) { resolver = arg });
  image.onload = function () {
    resolver(Promise.all([
      createImageBitmap(image,  0,  0, 40, 40).then(function (image) { sprites.person = image }),
      createImageBitmap(image, 40,  0, 40, 40).then(function (image) { sprites.grass  = image }),
      createImageBitmap(image, 80,  0, 40, 40).then(function (image) { sprites.tree   = image }),
      createImageBitmap(image,  0, 40, 40, 40).then(function (image) { sprites.hut    = image }),
      createImageBitmap(image, 40, 40, 40, 40).then(function (image) { sprites.apple  = image }),
      createImageBitmap(image, 80, 40, 40, 40).then(function (image) { sprites.snake  = image })
    ]));
  };
  return promise;
}

function runDemo() {
  var canvas = document.querySelector('canvas#demo');
  var context = canvas.getContext('2d');
  context.drawImage(sprites.tree, 30, 10);
  context.drawImage(sprites.snake, 70, 10);
}

loadMySprites().then(runDemo);

8.11 Animation frames

Some objects include the AnimationFrameProvider interface mixin.

callback FrameRequestCallback = undefined (DOMHighResTimeStamp time);

interface mixin AnimationFrameProvider {
  unsigned long requestAnimationFrame(FrameRequestCallback callback);
  undefined cancelAnimationFrame(unsigned long handle);
};
Window includes AnimationFrameProvider;
DedicatedWorkerGlobalScope includes AnimationFrameProvider;

Each AnimationFrameProvider object also has a target object that stores the provider's internal state. It is defined as follows:

If the AnimationFrameProvider is a Window
The Window's associated Document
If the AnimationFrameProvider is a DedicatedWorkerGlobalScope
The DedicatedWorkerGlobalScope

Each target object has a map of animation frame callbacks, which is an ordered map that must be initially empty, and an animation frame callback identifier, which is a number that must initially be zero.

An AnimationFrameProvider provider is considered supported if any of the following hold:


Window/requestAnimationFrame

Support in all current engines.

Firefox23+Safari7+Chrome24+
Opera?Edge79+
Edge (Legacy)12+Internet Explorer10+
Firefox Android23+Safari iOS?Chrome Android?WebView Android4.4+Samsung Internet?Opera Android?

The requestAnimationFrame(callback) method steps are:

  1. If this is not supported, then throw a "NotSupportedError" DOMException.

  2. Let target be this's target object.

  3. Increment target's animation frame callback identifier by one, and let handle be the result.

  4. Let callbacks be target's map of animation frame callbacks.

  5. Set callbacks[handle] to callback.

  6. Return handle.

Window/cancelAnimationFrame

Support in all current engines.

Firefox23+Safari7+Chrome24+
Opera?Edge79+
Edge (Legacy)12+Internet Explorer10+
Firefox Android?Safari iOS?Chrome Android?WebView Android?Samsung Internet?Opera Android?

The cancelAnimationFrame(handle) method steps are:

  1. If this is not supported, then throw a "NotSupportedError" DOMException.

  2. Let callbacks be this's target object's map of animation frame callbacks.

  3. Remove callbacks[handle].

To run the animation frame callbacks for a target object target with a timestamp now:

  1. Let callbacks be target's map of animation frame callbacks.

  2. Let callbackHandles be the result of getting the keys of callbacks.

  3. For each handle in callbackHandles, if handle exists in callbacks:

    1. Let callback be callbacks[handle].

    2. Remove callbacks[handle].

    3. Invoke callback, passing now as the only argument, and if an exception is thrown, report the exception.

Inside workers, requestAnimationFrame() can be used together with an OffscreenCanvas transferred from a canvas element. First, in the document, transfer control to the worker:

const offscreenCanvas = document.getElementById("c").transferControlToOffscreen();
worker.postMessage(offscreenCanvas, [offscreenCanvas]);

Then, in the worker, the following code will draw a rectangle moving from left to right:

let ctx, pos = 0;
function draw(dt) {
  ctx.clearRect(0, 0, 100, 100);
  ctx.fillRect(pos, 0, 10, 10);
  pos += 10 * dt;
  requestAnimationFrame(draw);
}

self.onmessage = function(ev) {
  const transferredCanvas = ev.data;
  ctx = transferredCanvas.getContext("2d");
  draw();
};